AUSTRALIAN MONITOR MX82 Specifications download pdf (Page 7)

INSTALLATION AND TROUBLESHOOTING

PAGE 7MX82 INSTALLATION & OPERATION MANUAL

INPUT CONNECTIONS

For wiring balanced in, pin 2 is hot. Unbalanced wiring on the microphone

inputs is not recommended. Balanced input wiring (shielded pair cable) is

recommended.

Unbalanced RCA wiring should be keep as short as possible. Typically less

than 3m.

LINE OUTPUT

The LINE output XLR can be used to connect up to 6 booster ampliﬁers.

Balanced wiring (shielded pair cable) is recommended.

NOTE: When wiring the LINE output as unbalanced, Pin2 should be

wired as hot and Pin1 should be wired as ground/shield.

Do not wire Pin3.

RECORD OUTPUT

The Record output wiring should be kept as short as possible. Typically less

than 3m.

TR OUB LES HOOT ING G UID E

TROUBLE LIKELY CAUSE REMEDY

Power LED not on Power not reaching unit Check mains connection

Check mains fuse

Check power switch is on

Noisy output Incorrect gain structure See setup guide

Distorted sound Input is overloaded Check MIC/LINE switch

Reduce input level at source

Output is being over driven Reduce output volume

Bass control is turned up Reduce Bass control level

No sound but unit is on Volume turned down Check volume controls

Tones and/or VCA control does not work Module not installed Purchase optional modules

Condenser microphone does not work Phantom power not switched on Switch on phantom power

1 2 3 4 5 6 7 8 9 10 11 12

No comments

AUSTRALIAN MONITOR MX82 Specifications Page 7