Australian-monitor DPRM User Manual download pdf (Page 6)

PAGE 6 DPRM INSTALLATION & OPERATION MANUAL

PROGRAMMING

The following steps are for programming the remote control

panel for use in ZONE X:

Hold down the RESET button on the back.

While holding down the RESET button, hold down both the Up and

Down volume buttons.

Release the RESET button.

The remote control panel will beep 3 times indicating it is in

program mode. The BUSY LED will stay lit while in program mode.

Press the Up button X times (the unit will beep each time).

Eg. for ZONE 4, press 4 times

Press the Down button.

The BUSY LED will go out. The remote control panel is now

programmed.

Confirm that the panel is controlling the correct zone.

NOTE: You have approx. 2 secs to begin the programming

and between button presses else it will exit

programming mode.

☛

1 2 3 4 5 6 7 8

No comments

Australian-monitor DPRM User Manual Page 6