Australian-monitor AMISMSC1 User Manual download pdf

AMISMCS1

Microphone Splitter/Combiner

Introduction

The Australian Monitor Installation Series MCS1 mic splitter/combiner

produces 2 balanced XLR signals, (1 direct, 1 transformer isolated) from a

single balanced XLR input. The AMIS MCS1 provides a ground lift switch to

eliminate hum, & as part of the AMIS Contractor Tools range, the AMIS

MCS1 is an inexpensive splitter/combiner that has a multitude of uses in a

wide variety of installations.

Description

• Input: This balanced XLR input receives signal from a mic or other

source.

• Thru Output: This balanced XLR output is wired in parallel to the Input

& provides a balanced signal output.

• Output: This XLR output provides a transformer isolated output of the

input signal feed.

• GND Lift Switch: When this switch is in “ground” position pin1 of both

the input & the output are connected. When this switch is in “lift”

position these grounds are separated. This switch is used to

eliminate hum.

Specifications

Input impedance: 600 Ohms

Output Impedance: 600 Ohms

Dimensions: 95mm x 73mm x 40mm

Weight: 305.5g

1 2

AMISMCS1 Microphone Splitter/Combiner Introduction The Australian Monitor Installation Series MCS1 mic splitter/combiner produces 2 balanced XLR s

Page 2

No comments

Australian-monitor AMISMSC1 User Manual